uncoated disc with radial leads description point-matched disc thermistor with bare lead-wires. features ? low cost solid state sensor ? resistance tolerances down to 2% ? high sensitivity to changes in temperature ? suitable for temperature measurement, control and compensation ? excellent mechanical strength ? wide operating temperature range: -58f to 302f (-50c to 150c) ? suitable for pcb and probe mountings ? available in a wide range of material systems ? also available with epoxy coating. ? available on tape and reel to eia rs-468a for automatic insertion ntc thermistors type rl30 a mphenol advanced sensors
type rl30 specifications options ? other resistances and tolerances at other temperatures available. ? resistance tolerance codes: g = 2% C j = 5% C k = 10% C l = 15% C m = 20% ? alternative lead lengths, lead materials, insulations ? the - k suffix is the same as the di suffix in earlier catalogs type number ro@25c material beta b d t systems 25/85 in mm (mw/k) (sec.) rl3004-6.56-59-m 10 d5.9 3096 .130 3.30 7.0 35 rl3006-9.84-59-m 15 d5.9 3096 .150 3.81 7.5 45 rl3008-13.1-59-m 20 d5.9 3096 .170 4.32 8.0 50 rl3004-31.2-73-k 75 d7.3 3468 .130 3.30 7.0 35 rl3005-44.5-85-k 75 d8.5 3772 .140 3.56 7.0 35 rl3006-59.4-85-k 100 d8.5 3772 .150 3.81 7.5 45 rl3004-144-95-k 250 d9.5 3965 .130 3.30 7.0 35 rl3006-231-95-k 400 d9.5 3965 .150 3.81 7.5 45 rl3004-291-97-k 500 d9.7a 3972 .130 3.30 7.0 35 rl3006-436-97-k 750 d9.7a 3972 .150 3.81 7.5 45 rl3004-459-103-k 800 d10.3 4073 .130 3.30 7.0 35 rl3005-574-103-k 1k d10.3 4073 .140 3.56 7.0 35 rl3007-861-103-k 1.5k d10.3 4073 .160 4.06 7.5 40 type number ro@25c material beta b d t systems 25/85 in mm (mw/k) (sec.) rl3005-1100-120-k 2k d12.0 4356 .140 3.56 7.0 35 rl3006-1377-120-k 2.5k d12.0 4356 .150 3.81 7.5 45 rl3008-1652-120-k 3k d12.0 4356 .170 4.32 8.0 50 rl3004-2214-122-k 4k d12.2 4365 .130 3.30 7.0 35 rl3005-2768-122-k 5k d12.2 4365 .140 3.56 7.0 35 rl3006-5340-140-k 10k d14.0 4615 .150 3.81 7.5 45 rl3008-8010-140-k 15k d14.0 4615 .170 4.32 8.0 50 rl3004-7900-150-k 15k d15.0 4728 .130 3.30 7.0 35 rl3004-10.8k-138-k 20k d13.8 4561 .130 3.30 7.0 35 rl3006-10.5k-150-k 20k d15.0 4728 .150 3.81 7.5 45 rl3005-13.1k-155-k 25k d15.5 4783 .140 3.56 7.0 35 rl3006-16.2k-138-k 30k d13.8 4561 .150 3.81 7.5 45 rl3006-15.7k-155-k 30k d15.5 4783 .150 3.81 7.5 45 0.320 in max (8.1 mm) 0.25 in (6.4 mm) b thickness refer to table 24 awg tinned copper 1.5 in (38 mm) min aas-920-414a-04/2014 www.amphenol-sensors.com ? 2014 amphenol corporation. all rights reserved. specifcations are subject to change without notice. other company names and product names used in this document are the registered trademarks or trademarks of their respective owners.
|
